Attics get very warm in the summertime. So, what is the best way to beat that heat? Many companies want you to believe that there is only one solution to fixing the temperature in your attic. But no one product will necessarily make your home more energy efficient. Here are six different ways to reduce the temperature in your attic and save you money.
- Try using a thermostatically controlled roof-mounted ventilator. They will help to keep your attic much cooler in the summertime. The thermostat will usually start at 95 degrees Fahrenheit, which is the temperature that the attic fan usually starts at.
- Using insulation only keeps the attic’s heat from traveling through your home. But by adding powered attic fans, you will draw more air into the attic. While it does help reduce the heat in your attic, putting these fans in your attic costs more because of the loss of conditioned air. The air you lose from the attic is then drawn into your home from the outside, which will cause your cooling bill to go up.
- Radiant barrier: This is a coating material that gets sprayed onto the outside of your roof to help reduce the amount of heat that is radiated into your attic. The radiant barrier is shown to reduce about 68% of the heat that is being radiated into the attic. This will keep your attic cooler, which will reduce the cooling load on your home.
- Continuous ridge vent: This type of vent runs along the entire ridge of your roof. It is placed at the highest point of your roof so that the hot air rises to get out. However, for best results you must have sufficient vents to allow for the free airflow. The biggest downside to this type of cooling system, though, is that you must install it when you are installing either a new roof or building a new home. This type of venting wouldn’t work properly on an already existing roof.
- Standard “turtle-back” vents: These are the most common vents for people to have and are very effective when enough of them are installed. These vents can be placed on an existing roof and will allow for a lot of airflow when properly installed.
- Be sure to check for restricted vents. Your vents can get clogged from dirt, rust, or insulation that was blown in from the attic. Make sure they are all open and will allow for the maximum amount of air to pass through.
The best time to make these types of repairs to your attic is during the wintertime when it is much cooler and a lot more bearable to fix the cooling in your attic. Just make sure you think ahead before the summertime, because many people don’t think they’ll need any sort of repairs until the problem is already there.
So, what are you waiting for? Start saving money on your energy costs by cooling down your attic.